Internet connection business is one of the most rapid growing industries nowadays. If you are Internet users, you should have ever touched the Ethernet Network Cable before. However, many of us don’t know how the joints of Ethernet Network Cable were made.

The most common type of Ethernet Cable are Ethernet Category 5 or commonly known as Cat 5 cable. Today, we are going to learn the  construction guidelines in making network cables, especially when you tried to install a long network cable in your home.

Before you start, make sure you have a special crimping tool, network cables and few 8P8C connectors on your hand.
In this article we want to show you the methods(568A and 568B methods) you can use to make the end to end joint of Ethernet Network Cable.

Another important thing to consider is the wiring arrangement based on the wiring specifications that you will need to follow.
In the case when you apply the 568B method, put the wires according to the following order, from left to right:

-white orange
-orange
-white green
-blue
-white blue
-green
-white brown
-brown

See: How to Make a Network Cable